If You Did Not Know ...

Friday, March 8, 2019

Resizing PDF size when exported from MsVisio

You can follow these steps:

In MsVisio, on the File tab, click Options, and then in the navigation pane, click Customize Ribbon.
In the Main Tabs pane, click to select the Developer check box, and then click OK.
On the Developer tab, click Show ShapeSheet, and then click Page.
In the Print Properties section of the ShapeSheet, set the following values to 0:

PageLeftMargin
PageRightMargin
PageTopMargin
PageBottomMargin

Use the Fit to Drawing command again.
The page now resizes to fit the same dimensions of the drawing, and there is no margin.

Thursday, October 29, 2015

Convert .ogv files to .mp4 without losing quality in Ubuntu

Hey

There are two methods to achieve this.

Type the following: avconv -i my-video.ogv -c:v libx264 -preset veryslow -qp 0 -vf scale="1280:trunc(ow/a/2)*2" -c:a libmp3lame -qscale:a 3 -ac 2 my-video.mp4
Use vlc media player:

go to "Media" -> "Convert/Save" -> "File" and then add your file
Press "Convert/Save" and choose "Video H.264 + mp3 (mp4)"

Cheers !!!

Wednesday, June 17, 2015

Open files with different encoding (like Shift-JIS) in Visual C++

Hey,

If you happened to be in Japan and need to go through comments which are written in Japanese for some of your Visual C++ projects, then you may also have encountered that the comments are not displayed properly.

The reason is that the files are opened with different encoding; not in Shift-JIS.

To resolve this issue,
- in the "Solution Explorer", right click on some file and choose "Open with"
- in "Choose the program you want to use to open this file", select "C++ Source Code Editor (with encoding)" at set it as default.
- in next popup, choose "Japanese (Shift-JIS) - Codepage 932"and press OK

If the comments are still not visible, you may want to choose a different encoding scheme until you get it right.

PS
I am using Visual Studio 2013 Professional Edition

Cheers!

Wednesday, March 11, 2015

Importing LaTeX equations to MS Word

Hey,

This is how it is done.
The credit should go to original contributor at [here]

Let's assume your equation is x=y+z
Create the following .html file using your favorite text editor and insert the equation between $$ marks.

<!DOCTYPE html>

<html>

<head>

src="http://cdn.mathjax.org/mathjax/latest/MathJax.js?config=TeX-AMS-MML_HTMLorMML">

</script>

<title>tex texample</title>

</head>

<body>

$$x=y+z$$

</body>

</html>

View that in a web browser, right click and select "show MathML as/MathML Code"
Select all and copy it into your favorite text editor in a new document.
Add <?xml version="1.0"?> at the beginning and again copy everything.
Paste it in MS Word and there you have your equation.

Friday, December 19, 2014

Matlab R2014a on Mac Maverick Retina Display

Hi guys,

I think you have also encountered that the Matlab GUI is blurry.
The reason for this is that previous versions of Matlab like R2013b (and R2014a) includes a Java runtime (JRE) on the package itself, which however does not support the new features like Retina displays.
As a workaround, you can install the latest JRE and make Matlab point to this JRE.
This is how it is done. Credit should go to original contributors; I am just putting the links here.

Install latest JRE from link (you can choose jre-7u71-macosx-x64.dmg); may be you want to restart the machine.
Create an AppleScript with the following script and save it as app. Note that all the code needs to be in one line.

do shell script "export MATLAB_JAVA=\"/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home\"" & "; export MATLAB_USE_USERWORK=1" & ";/Applications/MATLAB_R2014a.app/bin/matlab -desktop &> /dev/null &"

To create an AppleScript: Finder->Applications and find for AppleScript Editor (find within applications; not "This Mac") and paste the above script
Save it as an app.

If you would like to change its icon,

select app in Finder and open app directory through “Show Package Contents”
go to Contents/Resources and copy/paste the new icon (.icns file) onto applet.icns (you can find Matlab icons from Matlab application folder itself)
the above steps themselves do not work usually, so do the following as well.
select the app, again in Finder and this time, click on “Get Info”
select the app icon at the top - a blue outline will appear
copy the icon (.icns file) onto this outlined icon (command-v)
now, check the .app directory using a terminal - “ls -la”
the “Icon?” file should be there
delete this file - “rm Icon^M”
immediately, the app should have the copied icon beside it in the Finder

Credit should go to

Florian @ link
Asanga @ link

Cheers!

Sunday, November 9, 2014

Remove Pyramid Grid from ODE Drawstuff

Hi,

Here is how it is done.

In the ode source find drawstuff.cpp
In that you will find the call to the method drawPyramidGrid();

comment this out

Next, run the following in the source folder

$ ./configure --enable-double-precision --enable-shared
$ make
$ make install

To copy .h files and libraries to /usr/local/include and /usr/local/lib:

$ sudo make install
$ sudo cp -p drawstuff/src/.libs/libdrawstuff.a /usr/local/lib/
$ sudo cp -p drawstuff/src/libdrawstuff.la /usr/local/lib/
$ sudo cp -rp include/drawstuff /usr/local/include/
$ sudo cp -rp drawstuff/textures /usr/local/include/drawstuff/

That's it
Cheers!

Thursday, November 6, 2014

DC Motor Torque, Speed


There is a torque-speed curve for motors, which looks like:





[reference: link]

This curve has been drawn for constant voltage and changing load.

First things first. There is no need to confuse the word “torque” related to a motor.

If we recall that when a current carrying conductor in a magnetic field is subjected to a force and it is this force that creates the torque to rotate the rotor (conductor), it is this torque we are still talking about.
[reference: link]

If there is a load attached to the rotor it wont affect the torque generated by the motor as it only depends on the current, the field, number of turns and the area of the coil.
T = BINA Cosθ

It is important to note that the above curve has not been drawn for transients of motor speed; it is drawn for the final stabilized speed ω of the motor.

We discuss the transients of motor speed in order to understand what is going on but will draw the stabilized speed ω in the curve versus the torque.

Let's say we have some fixed load attached to the motor and the applied voltage is constant.

Now there is one thing we should remember. That is the existence of electrical torque and mechanical torque.

We already know what electrical torque is.

Mechanical torque is the usual force x distance in relation to the load.

That is the mechanical torque we need to turn the input shaft of the load.

When the motor is running in steady state, the armature current is constant, and the electrical torque is equal and opposite of the mechanical torque or load torque.

When the motor is decelerating, the motor torque is less than the load torque. Conversely, when a motor is accelerating, the motor torque is higher than the load torque.

so, it is the resultant torque, τ_m - τ_l= τ, that will account for the acceleration of the load.

This is somewhat like friction when we apply a force to a box or something.

At the beginning, ω=0 and CEMF (counter electro motive force or back emf), which is proportional to ω, will be zero.

Without any CEMF and small resistance of the coil, a huge current will be drawn from the DC source.

This will result in large torque τ_m; torque is proportional to current (or current² in series DC motor).

τ_m - τ_l= τ will be large and ω will gradually increase.

When ω increases, however, there will be CEMF building up, which will reduce the applied voltage to the current coil.
VDC – CEMF = v (VDC const.)

When v drops → the current drops → τ_m drops → τ_m - τ_l= τ drops

There will be, however, a torque and still there will be acceleration. What is happening is that this acceleration is gradually decreasing.

Finally,  τ_m = τ_land there wont be any resultant torque.

As a result, ω will stabilize → CEMF will stabilize → VDC – CEMF = v will stabilize → current i will stabilize.

```
Now we have a point in curve. (τ_m, ω)
```

Reduce load (or load torque)

Now, we reduce the load. This means the mechanical torque required to turn the load τ_l will be reduced.

And we start everything from the beginning  ω=0

Now τ_m - τ_l= τ will be large. (τ_lhas become smaller)

As a result, the acceleration of motor will be high. So, ω will attain higher values than the previous case.

Again CEMF will come into play. And, τ_mwill start to decrease and will eventually equal τ_lwhich is smaller than the previous case.

As a result, ω will stabilize (at a higher value) → CEMF will stabilize → VDC – CEMF = v will stabilize → current i will stabilize.

Now we have another point in the curve. This time the torque will be lesser and ω will be higher, than the previous case.

So we saw that when the load (or load torque) decreases we need a small τ_m at stability. That is we needed little current. That is we needed VDC – CEMF = v to be small. This is achieved by higher CEMF, which is achieved by higher ω.

For a huge load (or load torque), τ_m will not be sufficient to turn the motor. Therefore,  ω=0 and there wont be any CEMF. Thus, i max → τ_max

Actually, this is kind of equal to the case of initial instance of a regular load, too. The only difference is the starting torque is enough to drive the load in this case.

Increase speed

For a given load we saw that ω stabilizes after its initial transients.

So, how can we increase the speed for a given load (e.g. fan)?

To increase speed we need more torque τ_m.

```
That is we need more current.
```

The only way we can do that is by increasing the voltage.

When the voltage is increased, we have more current and we will have a resultant torque.

This will increase the speed ω from its current value.

Again CEMF will come into play and, the resultant voltage will be reduced.

When v drops → the current drops → τ_m drops → τ_m - τ_l= τ drops.

Finally,  τ_m = τ_land there wont be any resultant torque.

As a result, ω will stabilize → CEMF will stabilize → VDC – CEMF = v will stabilize → current i will stabilize.

Note that in this case ω has stabilized at a higher value than previous.

Runaway

Let's say we want to control current/torque in a motor.

Assume that with a given load, the motor was drawing, say 100mA, turning at a speed of 1000rpm  and everything is steady.

Say we wanted to control current at 200mA.

```
And we increase the voltage.
```

So the current increases →  ω increases → CEMF increases → current starts to decrease.

That is we need higher voltage to maintain the current at the new set value.

Higher voltage → higher ω → higher CEMF → higher applied voltage needed → higher ω …

As a result, the motor speed runs away up to the maximum speed that is possible with the given supply voltage.

Such a runaway condition can occur unless it is limited by a higher-level control loop (velocity or position control), a mechanical stop (e.g. stopping by hand) or an additional safety speed limitation.

cheers!

Sunday, October 26, 2014

et al. in Latex References

Hi guys,

I use a separate .bib file for including references in my LaTex documents.
i.e.
\bibliography{bib/mybib}
\bibliographystyle{IEEEtrans}

where bib is a folder and mybib.bib is the bibliography file. It has entries in the following format.

@article{dissanayake2001solution,
  title={A solution to the simultaneous localization and map building (SLAM) problem},
  author={Dissanayake, MWM Gamini and Newman, Paul and Clark, Steve and Durrant-Whyte, Hugh F and Csorba, Michael},
  journal={Robotics and Automation, IEEE Transactions on},
  volume={17},
  number={3},
  pages={229--241},
  year={2001},
  publisher={IEEE}
}

Now, if you are running out of space you can make the author list small by using et al. keyword. To use that just type "and others" in the authors sub-entry like this.

@article{dissanayake2001solution,
  title={A solution to the simultaneous localization and map building (SLAM) problem},
  author={Dissanayake, MWM Gamini and others},
  journal={Robotics and Automation, IEEE Transactions on},
  volume={17},
  number={3},
  pages={229--241},
  year={2001},
  publisher={IEEE}
}

By the way, you can export entries to BibTex from Google Scholar. Go to settings in Google scholar and in Bibliography manager "Show links to import citations into" choose BibTex.

That's it.

Cheers!!!

Friday, October 17, 2014

Writing Japanese using pLatex in Mac

This is how it is done!

First of all, the credit should go to Link and I am just copying from there.

Install Macports from here; follow any additional steps stated by them.
After installing Macports, type the following on the terminal

sudo port install pTeX +hiragino +otf +utf8 +motif +macosx

Install TeXShop if you do not already have it.
Open preferences in TeXShop and select "Set Default Values". In the drop down menu, choose Legacy pTeX (Shift JIS)
Save your tex file using Japanese SJIS encoding.
Press "Typeset" to build your file
If things are not working try the following.

modify the file “/Users/<your account>/Library/TeXShop/bin/platex2pdf-euc” to change path to “opt” instead of “usr”. That is

from [export PATH=$PATH:/usr/local/bin:/usr/local/teTeX/bin]

to [export PATH=$PATH:/opt/local/bin:/usr/local/teTeX/bin]

If fontspec is needed:

sudo tlmgr update –self
sudo tlmgr install fontspec

Here is a sample code

%\documentclass[twocolumn,11pt]{jarticle} %In case two column layout

\documentclass[a4j]{jarticle}

\usepackage{graphicx} %for including graphics

\usepackage{nidanfloat}

\usepackage{url}

\title{タイトル}

\author{ 僕の名前 }

\date{2010年}

\renewcommand{¥refname}{References}

\begin{document}

\maketitle

\section{テスト}

これはテストです。

\end{document}

Friday, November 22, 2013

Single column abstract in two column TeX

Hey,

Use this trick to achieve above.

\begin{document}

\twocolumn[
\begin{@twocolumnfalse}
\maketitle
\begin{abstract}
...
\end{abstract}
\end{@twocolumnfalse}

cheers!

Thursday, October 3, 2013

Autocomplete in TexnicCenter

Hi all,

Use ctrl + space to autocomplete commands while you are typing.

Cheers!

Monday, September 30, 2013

Writing small Katakana letters using IME Language bar

Hi guys,

To write small letters like トゥ　simply type an 'x' before you type the 'u'
That's it.

Cheers!

Wednesday, September 25, 2013

MS Visio Drawings to PDF -> Latex

Hey,

If you want your MS Visio drawings exported as PDF so that you can include them in your .Tex files (with metadata) here is what you have to do.

First, change the page size

In MS Visio 2007: File->Page Setup->Page Size: Size to fit drawing contents

Next, export

File->publish as PDF or XPS
And play around with the Options

current page
include background or not etc.

The exported pdfs are good in quality and you can select text fields.

Cheers!

Wednesday, September 11, 2013

Variables in LaTeX

Hello,

To use variables:

% Set the new variable called "\MyVariable" with the value 0.5
\newcommand{\MyVariable}{0.5}

% To use the variable.
\MyVariable

e.g. includegraphics[width=\MyVariable\columnwidth]{img/img.pdf}

Ubuntu LibreOffice Calc graphs to LateX

Here is how it is done!

The first thing to do is to get the graph's size

selce your graph, right click on it and choose "Position and Size"
Get a printscreen or memorize the size values

Copy the graph and open LibreOffice Draw and paste the graph there.
Go to Format->Page and change the Width and Height using the above graph sizes
Move the graph so that it fits perfectly on to the page.
Finally, go to File->Export as PDF

Better to choose lossless compression

Now you can use this pdf file in your .tex document

If you want to use grayscale pdf in your latex document there are some ways to convert the pdf into grayscale.

I use http://greyscalepdf.com/ (or http://online.puzzleflow.com/process/all2gray) to get the job done easily.

cheers!

MATLAB figures in LaTeX

Hey,

Here is how it is done.

Open you figure file in MATLAB
Goto File->Export Setup...->
Apply you modifications like converting to grayscale etc. (Rendering->Colorspace)
Choose "Export"
In "Save as type" choose EPS
Now you can use this EPS file in you .tex file:

\begin{figure}[t]

\begin{center}

\includegraphics[width=\columnwidth]{figure.eps}

\caption{my caption}

\label{fig:system}

\end{center}

\end{figure}

and choose latex->ps->pdf in your project builder (e.g. in TeXnicCenter)

Or if you want to convert this to pdf use the epstopdf utility that comes with MikTeX in the command prompt:

epstopdf figure.eps

and use it like this:

\begin{figure}[t]

\centering

\includegraphics[width=columnwidth]{figure.pdf}

\caption{my caption}

\label{fig:system}

\end{center}

\end{figure}

Note:
For some reason, direct export to pdf does not preserve the figure size.

Monday, August 26, 2013

To copy Photo Library from iPhone to PC

Hey guys,

If you need to copy Photo Library from iPhone to PC, use DiskAid - http://www.digidna.net/diskaid
It is free!

Cheers!

Friday, July 5, 2013

To set your favorite song as the iPhone ringtone

Hi guys,

Please check this: http://www.pcadvisor.co.uk/how-to/audio/3274143/make-song-your-iphone-ringtone/
Credit goes to the original author.

Works as a charm!

cheers!

Wednesday, July 3, 2013

Latex: Captions both above and below of your table

Hi guys,

As the title says here is what you have to do:

first, \usepackage{caption}

\begin{table}

\begin{center}

\caption{caption1}

\label{Table: ABC}

\begin{tabular}{|p{1.5cm}|p{2cm}|p{1.2cm}}

\hline

AAA&BBB&CCC\\

a&b&c\\

\hline

\end{tabular}

\caption*{caption2}

\end{center}

\end{table}

Cheers!

Wednesday, June 26, 2013

Syncing non-Amazon Books in Kindle App

Hey Guys,

If you want to sync your Kindle books, which are not purchased through Amazon, you can do so by using your Amazon account.

Go to Amazon webpage and sign in.
Move the mouse to the "Hello <your_name>" and you will see:
Go to "Your Cloud Drive"
Upload your file. Kindle uses .mobi format for books.
Open up your Kindle app in your device and select cloud. The uploaded files will be available there.